[BoltRF] Re-Write Memory Locked

While trying to re-write data on tag if you encounter the following message:

"Memory locked. The Tag memory location is locked or permalocked and is either not writeable or not readable"

This message will appear if you attempt to write to a write-protected memory.

In RFID Read/Write Tag option, follow the next steps:

User Memory Read/Write

1. Click "Auto SCAN(1 sec)"

2. Select Memory Bank, input Length and Offset

3. Click "READ"

4. Check results

User Memory Read/Write

1. Select Memory Bank as "User"

2. Input Length=1 and Offset=0

3. Click "READ"

4. Input "1234"

5. Click "Write"

6. Check results: Writing Tag completed successfully